2 - Installation
Connecting the MicroDock
E-MU 1616/1616M CardBus Digital Audio System
11
Note About Windows Logo Testing
When you install the Digital Audio System drivers, you will see a dialog box informing
you either that the driver has not been certified by Windows Hardware Quality Labs
(WHQL), or that the driver is signed by Creative Labs, Inc, and you will be asked if you
would like to continue with the installation.
The Digital Audio System audio drivers are not certified by WHQL because the product
does not support some of the features that the Microsoft Windows Logo Program
requires, most notably Universal Audio Architecture (UAA) and Digital Rights
Management (DRM).
Despite this, the Digital Audio System audio drivers have been rigorously tested using
the same test procedures that a WHQL qualified driver requires, and it passes in all of
the other important categories, including those that measure the relative stability of the
driver. So, it is perfectly safe to install these drivers on your computer.
Connecting the MicroDock
1.
Connect the supplied EDI cable between the 02 CardBus Card and the MicroDock.
2.
Connect the su48 volt DC adapter to the+48VDC jack on the rear of the
Microdock. See the diagram at right.
3.
Connect your audio inputs and outputs to the MicroDock as shown on
page 18
.
4.
Turn the MicroDock on by turning the Headphone Volume control.
Connector Types
These connector types are used to connect the E-MU MIcroDockhardware components.
They will be referred to by the name shown in the first column of the following chart:
Name
Description
Connects
EDI
CAT5 Connector
02 CardBus card and MicroDock
S/PDIF In
RCA Connector
S/PDIF digital audio devices
S/PDIF Out
RCA Connector
S/PDIF digital audio devices
ADAT Optical In
TOSLINK Optical Connector
ADAT digital audio devices (or S/PDIF)
ADAT Optical Out TOSLINK Optical Connector
ADAT digital audio devices (or S/PDIF)
Mic/Line Inputs
XLR Jacks or 1/4” jacks
(balanced or unbalanced)
XLR: connect to microphone
1/4”: instrument inputs or line inputs
Line In/Out
1/4” connectors
Connect to balanced or unbalanced
inputs and outputs.
EDI
48
VDC
+
-
+48V DC Adapter
02 CardBus Card
The Headphone
Volume Control is
the Power Switch.