background image

7 - Appendix

Technical Specifications

E-MU 1820M/1820/1212M PCI Digital Audio System

131

MIC PREAMP/LINE INPUT

Type

TFPro™ combination microphone preamp and line input

Frequency Response

+0.8/-0.1 dB, 20 Hz - 20kHz

Stereo Crosstalk

< 120 dB, 1kHz

LINE INPUT

Gain Range:

-12 to +28 dB

Max Level:

 

-17 dbV (19.2 dBu)

THD+N:

-94 dB (.002%), 1 kHz at -1 dBFS

Dynamic Range:

100 dB (A-weighted, min. gain)

SNR: 

100 dB (A-weighted, min. gain)

Input Impedance:

10K ohm

CMRR: 

> 40 dB (60Hz)

MICROPHONE PREAMP

Gain Range:

-10 to +50 dB

Max Level:

 

-12 dbV (-9.8 dBu)

THD+N:

-95 dB (.0018%), 1 kHz at -1 dBFS

SNR: 

100 dB (A-weighted, min. gain)

Input Impedance: 

330 ohm

CMRR: 

> 80 dB (60Hz)

HEADPHONES

Frequency Response:

+0.0/-0.35 dB, 20 Hz - 20 kHz

THD+N:

 (1 kHz, max. level)

33 ohm load: -70 dB (0.032%)
600 ohm load: -85 dB (0.006%)

SNR: 

112 dB (A-weighted)

Dynamic Range:

112 dB (A-weighted)

Stereo Crosstalk: 

< -100 dB (1kHz at -1 dBFS, 600 ohm load)

Max Output Power:

 

500 mW

Output Impedance:

22 ohms

Gain Range:

85 dB

Specifications: 1820 System

Summary of Contents for 1212M

















































































































































Reviews: