e-motion X32-69E-GB-TCU-UK, User Manual

Page: 7 / 30

6 6
DETACHING THE STAND
This television requires a VESA 400 x 200 wall mount, or equivalent.
Detaching the Stand
1) Remove the 4 screws highlighted
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electric wires, water or gas pipes.
Wall mounting the TV
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes
are indicated in the picture below.
Important – If wall mounting this TV, only use the screws already provided
in the wall mounting holes. Using other screws which are longer could cause
irreparable damage to internal parts.
Detaching the stand and wall mounting
fi g 2
For optimum viewing, if wall mounting the TV higher than eye level, the TV
should be tilted downwards so that the TV’s screen is ‘face on’. See fi g 1 and 2
TV
TV
Viewing angle
Viewing angle
3) Although there are no live parts exposed when removing the stand,
(in the event of wall mounting the TV) for aesthetic purposes, included
in the accessory pack is a cover plate which can be clipped into the
underside of the TV.