background image

4

IMPORTANT SAFETY INSTRUCTIONS

Please read these instructions. All the safety and operating instructions should be read before the 
appliance is operated.

Warnings

• 

To reduce the risk of fi re, electric shock or damage to the television, do not expose it to  

 

  dust, rain moisture, or place any objects fi lled with liquids on or near the television.

• 

Do not place the television in a confi ned space, ensure that nothing can obstruct the   

 

  ventilation openings at the rear of the television.

• 

Dispose of this television and any components including batteries in an environmentally  

 

  friendly manner. If in doubt, please contact your local authority for details of recycling.

Safety

• 

For your safety, this appliance is fi tted with a fused moulded 3 pin mains plug. Should  

 

  the fuse need to be replaced, ensure that any replacement is of the same amperage and  

 

  approved with the BSI mark. 

• 

Never try and replace the mains plug unless you have adequate qualifi cations and are  

 

  legally authorised to do so. In the event that a replacement Mains cable is required,    

 

  contact the manufacturer for a suitable replacement.

• 

Never use the television if it is damaged in any way.

• 

Always place the television on a fl at level surface avoiding anywhere which may be subject  

 

  to strong vibration. 

• 

Ensure the television is not placed on top of the power cable as the weight of the  

 

 

  television may damage the cable and cause a safety hazard.

• 

Never place mobile phones, speakers or any other device which may cause magnetic or  

 

  radio interference with the television. If interference is apparent, move the device causing  

 

  the interference away from the television.

• 

To disconnect the apparatus from the mains, please use the all pole mains switch located on the side,  

  underside or rear of the TV. The switch shall remain readily operable.

• 

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine,  

  fi re or the like.

• 

Install the product at least 4 cm from the wall for ventilation

Maintenance

• 

To clean this unit, wipe with a soft dry cloth. If the surfaces are extremely dirty, use a   

soft 

cloth dipped in a soap and water solution or a mild detergent solution.

• 

Use eyeglass cleaner to remove stubborn dirt from the LCD/LED Screen.

• 

Never use alcohol, paint thinner or benzene to clean this unit.

• 

Before using a chemically treated cloth, read the instructions that came with the cloth 

carefully.
CAUTION: If water or other liquid enters the television through the display panel surface 
or back cover a malfunction may occur.

Packaging

• 

The safest way to transport your item is in the original box/packaging - please save your  

 

  packaging for this.

• 

You will need original box/packaging in the event of warranty/service repair or support. We are unable  

  to carry out warranty/service if you are unable to package it correctly. 

To prevent the spread of fi re, keep candles or 
other open fl ames away from this product at all times

Summary of Contents for X185/69G-GB-TCDUP-UK



































Reviews: