nGauge Instruction Manual v1.14 | © 2017 E-Motion Products, LLC
14
5.3 ADJUSTING STANDARD/METRIC UNITS
nGauge offers the ability to automatically adjust a signal to the English standard or metric units.
To Change Units:
1.
From the Main Menu tap [Setup], [Display], [Units].
2.
Select the Units you wish to use and select [Ok].
3.
All signals will be adjusted to the selected unit of measure.
5.4 DISPLAY BRIGHTNESS
1.
Tap on [Diagnostics] menu
2.
Tap on [Settings]
3.
Tap on [Brightness]
4.
Select the desired brightness level.
5.5 DEFAULT POWER-UP SCREEN
nGauge allows you to easily change which screen appears on initial power-up of the nGauge. This can help make it faster and easier to
navigate through the nGauge to find the functions you use most.
1.
From the Main Menu, tap [Diagnostics]
2.
Tap on [Settings]
3.
Tap on [Startup Mode]
4.
Select the item you’d like to be present on power
-up.
The current choices are “Main Menu” and “Gauges”.
The change will be seen the next time the nGauge is powered back on.
5.6 SLEEP/WAKE SETTINGS
The user can set the events desired to trigger sleep and wake of the nGauge.
1.
From the Main Menu, tap [Diagnostics]
2.
Tap on [Settings]
3.
Tap on [Sleep/Wake]
4.
Choose sleep mode (Never, Alternator On, Engine Running, Vehicle Data, Touch)
5.
Wake Mode (Touch, Alternator On, Alternator Noise, or Engine Running)
6.
Also adjustable are the following:
Idle Time: 5 to 300 seconds
On/Off Volts
Voltage Threshold
The change will be seen the next time the nGauge is powered back on.
