e-motion 1503 UOCIII, User Manual

Page: 8 / 24

A
B
Cable TV converter/
descrambler
Not included
（ ）
RRF switch
Not included
（ ）
2 set signal
splitter
Not included
（ ）
Cable TV Line
OUT IN
CABLE TV CATV CONNECTION
（ ）
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installers attention to Article 820-40 of
the National Electrical Code NEC that provides guidelines tor proper grounding and , in
particular, specifies that the cable ground shall be connected to the grounding system of the
building accurately or as close to the point of cable entry as possible, use of this TV for o-
ther than private viewing of programs broadcasted on UHF, VHF or transmitted by cable co-
mpanies for the use of the general public may require authorization from the broadcast/cable
company, and/or program owner.
A 75-ohm coaxial cable connector is built into set for easy hookup. When connecting the
75-ohm coaxial cable to the set, place the 75-ohm cable into the ANT terminal.
Some cable TV companies offer premium pay channels. Since the signals of these premi-
um pay channels are scrambled, a cable TV converter/descrambler is generally provided to
the subscriber the cable TV company. This converter/descrambler is necessary for normal
viewing scrambled channels.(Set your TV to channel 3 or 4, typically one of these channels
are used. If this is unknown, consult y-our cable TV company.)For more specific instructions
on installing cable TV, consult your cable TV company, one possible method of utilizing the
covered /provided by your cable TV company is explained below.
（ ）
，
Please note: the RF switch is required to provide two inputs (A and B).(not included) A p-
osition on the RF switch (not included); you can view all unscrambled channels by using the
TV channel keys. B position on the RF switch (not included ); you can vie w all scrambled
channels via the converter/descrambler by using the converter channel keys.
，
6