Configuration
STEP ONE: Configure Extension on the UCx Server
1. Login to the UCx Web-based Configuration Utility
2. Navigate to PBX - PBX Configuration - Extensions page
3. Add an Extension for a Generic SIP Device with the following basic parameters:
User Extension (e.g. 511)
Display Name
secret
4. Click on Submit to create the extension
5. Press the Apply Config bar at the top
STEP TWO: Obtain IP address of the 5006 phone
Connect the phone to a network that is setup for DHCP. After initialization is complete, perform the
following steps to obtain the IP address assigned to the phone:
From the phone, press the Menu key
Use the arrow keys to navigate to Status then select it
Select Information
Take note of the IPV4 address (IP address of the phone)
STEP THREE: Configure Account on the 5006 phone
From a browser, enter the IP address of the 5006 phone (obtained from STEP TWO).
Login to the web interface using the default username
admin
and default password
admin
.
Perform the following steps to register an account:
1. Navigate to the Profile - Basic page.
2. Enter the IP address of the UCx Server in the Primary SIP Server field, e.g.
192.168.1.200
.
Last modified: 10/15/18 09:08 PM
Copyright © 2015 E-MetroTel Global Inc.
Page: 6