E-Lux Sierra Classic, Owner'S Manual

Page: 7 / 44

5 | P a g e
1. Remove the packing and tape from around bicycle.
2. Carefully cut the zip ties holding the handlebars to the frame.
3. Place bike upright on wheels and kickstand.
4. Apply a small amount of grease inside of the gooseneck tube as
well as the threads and slider on stem of gooseneck.
5. Making sure that all wires and cables are facing front and not
twisted; install handlebar into handlebar stem tightening the bolt
on the handlebar stem using an Allen wrench.
6. Pull the seat clamp handle out from the seat post to release
pressure allowing you to remove the seat. Remove seat post and
apply a small bit of grease inside seat tube. Then replace seat.