H700 User Manual
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com www.e-lins.com
table 2-4 for the interface definition of the power cable and connection sequence. Specific
interface definition of the power cable and connection sequence you can read on the labels of
H700 products. Using 14~24AWG cable and referring to H700 products labels or the bellowed
interface definition and connection sequence, you need to use the oblate screw driver to fix the
cable to the connecting jacks of the pluggable terminal. After successfully connection, you
need to insert the terminal into the corresponding position in the bottom of the H700 products.
Notes:
Connection sequence should be accurate
。
Cable’s insulating striping length is
about 7mm. (For safety, insulating striping length should be too long). Please refer to the
picture.
Attention:
1. The power cable should be connected correctly. We suggestion double check
before switch it on. Wrong connections may destroy the equipment.
2. Power terminals: Pin 1 and Pin 2;
3. Here: Pin 2 is “
GND
”, PIN 1 is power input “
Vin
”(DC5~40V, or DV5~60V).