LNK-IMC3011-SFP
Hardened 10/100/1000Base-T to 1000Base-X SFP Ethernet Media Converter
2
V1.0
Installation
SFP Optical Module
You can select different SFP modules as required (Please refer to our SFP Ordering Options for the appropriate
module).
To insert/remove the SFP, the procedures are as follows:
1. On the front panel, insert the SFP module into the SFP port until it is securely locked.
2. Connect the optical fiber (1/2 core) to the LC connector(s) of the SFP.
3. To remove the SFP module, press down the lock of the LC connector of the optical fiber to pull out the fiber
cable.
4. Pull down the SFP lever and hold its position. Pull out the SFP module from the SFP port.
