LNK-IMC208P-SFP
Hardened Unmanaged 8-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical Ethernet
Switch
4
V1.0
Setup
1.
Connect one end of the Ethernet cables to their corresponding ports on the product. Connect the
other end to the network equipment such as IP cameras, Switches or PCs. Insert the SFP and
connect the optical fiber cables to its connectors.
2.
Connect the product with the power adapter and switch on the product, the PWR indicator should
then be ON. If it is not, please check whether the power cable is connected properly and the power
supply functions normally..
3.
After all cables are correctly connected, the indicators will be lit as per port status LEDs (page 5).
Interface
RJ-45 Pin Assignment
1000Base-T Pins
Pin
MDI
MDIX
1
TP0+
TP1+
2
TP0-
TP1-
3
TP1+
TP0+
4
TP2+
TP3+
5
TP2-
TP3-
6
TP1-
TP0-
7
TP3+
TP2+
8
TP3-
TP2-
Power Connection
：
：
：
：
Pin
Description
V1 -
V1 +
V2 -
V2 +
Power Input
GND
+12~48V
(DC)
GND
+12~48V
(DC)
Cable Connections
Signal Type
Cable Type
Connector
Ethernet
Cat. 5 or above
RJ45
Optical
SM/MM Optical fiber cable (depends on SFP)
LC
Power supply 1
Power cable
6-pin Terminal Block
（
Pin 1/2
）
Power supply 2
Power cable
6-pin Terminal Block
（
Pin 5/6
）
ALM
UTP
6-pin Terminal Block
（
Pin 3/4
）
