3.4 CD-ROM Installation
Please follow the steps listed below.
①
Open top cover and then remove the
HDD bracket
②
Take off the bottom of the HDD bracket and CD-ROM
bracket.
③
Fix the CD-ROM bracket at the HDD
bracket.
④
Install a pair of the CD-ROM bracket. Please make
sure the reverse side is secure too.
⑤
Install SATA burner. Line up the SATA
burner to the hole positions.
⑥
User screwdriver to fix the screws.
⑦
Put the bracket back. Please adjust the
CD-ROM to the proper position so that
the button of the front panel is directly
facing the pop-up button of the CD-ROM.
⑧
Connect the SATA cable and power wire.
Summary of Contents for ELI-SIP2- NVR32
