135
Parameter
Function
Enable tour
Select the checkbox here to enable tour function.
Interval
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Window Split
Here you can set window mode and channel group. System can
support 1/4/8-window according to device channel amount.
Motion
Detect Type
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
5.8.5.2.3 Zero Channel
The zero-channel interface is shown as in Figure 5-62. Here you can enable zero-channel function and
set corresponding information.
Figure 5-62
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
Select the checkbox here to enable Zero Channel function.
Compression System supports H.264.
Resolution
Please select from the dropdown list. System supports D1.
Frame rate
Please select from the dropdown list. The value ranges from 1-
25(PAL) or 1-30(NTSC).
Bit rate
Please select from the dropdown list.
5.8.5.3 PTZ
The PTZ interface is shown as in Figure 5-63.
Before setup, please check the following connections are right:
PTZ and decoder connection is right. Decoder address setup is right.
Decoder A (B) line connects with DVR A (B) line.
Click Save button after you complete setup, you can go back to the monitor interface to control speed
dome.
Summary of Contents for CJ-HDR104
