46
5.2.2.1
ONVIF
ONVIF
（
Open Network Video Interface Forum
），
this standard describes network video mode,
interface, data type and data interaction mode. ONVIF Standard’s aim is to achieve a network video
frame agreement and makes the network video products (including video front-end, video equipment,
etc.) from different manufacturers completely compatible.
ONVIF function default is closed.
5.2.3 PPPoE
The PPPoE interface is shown as in
21.
Input the PPPoE user name and password you get from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then reboot the device to get the setup activated.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from
the IP address column. When PPPoE is on, please disable UPnP to avoid influence on dial-up.
When you Check PPPoE enable, please disable UPnP.
Please note, you need to go to the IP address item to via the device current device information.
You can access the client-end via this address.
Summary of Contents for ELI-SIP2-B8-4R
Page 9: ...5 Figure 1 7...
Page 42: ...38 Figure 5 10 Figure 5 11...
Page 64: ...60 Figure 5 37 Figure 5 38...
