21
5
CORNER MOUNT BRACKET INSTALLATION
5.1
Component Installation
Corner mount bracket and its components are shown as below. See Figure 5-1.
Figure 5-1
5.2
Installation
5.2.1 Installation Requirements
The corner mount speed dome can be installed in the hard construction wall in the indoor or
outdoor environments where there is a 90 degrees angle. Before the installation, please make
sure:
The wall is thick enough to install the expansion bolt.
The wall can at least sustain the 8x weight of the speed dome.
5.2.2 Installation Steps
Step 1
Please draw four holes position in the wall with a 90-degree angle according to the holes of the
corner installation accessories. See Figure 5-2.Then you can dig four holes according to the
holes of the corner mount accessories and insert the M8 expansion bolts. Pull the integration
cable through the centre hole of the bottom of the corner bracket, the waterproof adhesive, and
the centre of the bracket. Please reserve the enough cable connection length and then use the
M8 expansion bolt to secure the corner mount bracket chassis on the wall.
Summary of Contents for ELI-SIP2-APTZ8-R30X
