e-Line Technology ELI-SIP-PPTZ-21-10X, User Manual

Page: 15 / 50

Network High Speed Mini Dome
User Manual
Error! Use the Home tab to apply
标题
1,heading 1,h:1,h:1app,level 1,Level 1
Head,H1,h1,Huvudrubrik,Title1,l1,1st
level,Section Head,Sec1,h11,1st level1,h12,1st
level2,h13,1st level3,h14,1st level4,h15,1st
level5,h16,1st level6,h17,1st level7,h18,1st
level8,h111,1Error! Use the Home tab to apply
标
题
1,heading 1,h:1,h:1app,level 1,Level 1
Head,H1,h1,Huvudrubrik,Title1,l1,1st
level,Section Head,Sec1,h11,1st level1,h12,1st
level2,h13,1st level3,h14,1st level4,h15,1st
level5,h16,1st level6,h17,1st level7,h18,1st
level8,h111,1
Issue V1.0 (2014-06-10) 7
Figure 2-4
Removing the protective vinyl sheet
----End
2.1.2 Installing the IPC on the Ceiling
Step 1
Determine the positions of installation holes on the ceiling based on the installation
dimensions of the bracket and mark the holes. Use a percussion drill bit with a diameter
of 8 mm to drill four holes that are 60 mm deep.
Step 2
Drive four expansion bolts into the holes.
Step 3
Align the dome IPC with the bracket. Mount the IPC on the bracket and rotate the IPC
clockwise so that the holes on the bracket are aligned with the screw holes on the
installation base of the IPC. Then, lock three screws between the bracket and the IPC,
as shown in Figure 2-5.