13
2)
The display No. 2 has three main buttons: M (MODE), + (UP), - (DOWN), a monitor, and a thumb throttle.
ON/OFF
Hold MODE for a couple of seconds to turn on the display and supply power to the controller. To turn off the display, press
and hold MODE to shut off the power. If the bike is not used for more than 10 minutes, the display will turn off automatically.
LCD offers a number of functions, such as:
Battery Indicator
When the battery is fully charged, the icon will show five full bars on the top left corner of the display. When the battery is
low on change, the last bar will start flashing.
Battery voltage
Flashing at low voltage
Speed (including real-time, max and average speed)
After turning on, the display shows real-time speed. Press and hold MODE and simultaneously click UP button to switch
speed information from real-time speed to average riding speed, or to the maximum speed. The display will show speed
relevant to the current ride only.
Real-Time Average Maximum
Distance and Current Ride Time
Short press MODE to switch from the cumulative total mileage (ODO) to the current ride mileage (TRIP), or to the current
ride time.
ODO Current Trip Current Ride Time
Walk Assist
Press and hold DOWN to start walk assist mode. The bike will keep moving at an even
speed of 6km/h. Release the button to exit walk assist mode.
IMPORTANT! Walk assist can only be used when pushing the bike when walking next to it.
Do not start this function when riding!
