E-Glide Mach 10, Instruction Manual

Page: 3 / 9

1. Turn power off
2. Unlock the clamp
3. Lower the steerer tube
BASIC OPERATION
Power Button
Press and hold the power button for 3 seconds to turn scooter on. Press and hold
for 3 seconds to turn off. Scooter will auto power off after 90 seconds of inactivity.
Change Speed Modes
With the scooter powered on, press the power button. L1 will show on the display
indicating mode 1 (15-20km/h). Pulling the throttle while riding controls the amount
of acceleration sent to the motors. Hold the mode button for 3 seconds to turn on
the headlights. Repeat to turn off.
Battery Indicator
Number of bars indicates remaining charge.
Note: Recharge the scooter before battery is completely flat. Over discharge can
damage the battery.
Mileage
When scooter powers on, ODO will be displayed on screen. Press the power
button and TRIP will be displayed. Press again to display VOLTAGE. With TRIP
displayed, press mode button for 3 seconds to reset TRIP data.
2 3
FOLD