background image

16

EN

of Horizon. Proof of purchase is required for all warranty 
claims.  SERVICE OR REPLACEMENT AS PROVIDED 
UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND 
EXCLUSIVE REMEDY. 

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF 
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY 
WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED 
IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT 
LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF 
HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES. Further, in no event shall the liability 
of Horizon exceed the individual price of the Product on 
which liability is asserted. As Horizon has no control over 
use, setup, fi nal assembly, modifi cation or misuse, no 
liability shall be assumed nor accepted for any resulting 
damage or injury. By the act of use, setup or assembly, the 
user accepts all resulting liability. If you as the purchaser 
or user are not prepared to accept the liability associated 
with the use of the Product, purchaser is advised to return 
the Product immediately in new and unused condition to 
the place of purchase.

Law

These terms are governed by Illinois law (without regard to 
confl ict of law principals).  This warranty gives you specifi c 
legal rights, and you may also have other rights which vary 
from state to state.  Horizon reserves the right to change 
or modify this warranty at any time without notice.

WARRANTY SERVICES

Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot 
provide warranty support or service. Once assembly, setup 
or use of the Product has been started, you must contact 
your local distributor or Horizon directly. This will enable 
Horizon to better answer your questions and service 
you in the event that you may need any assistance. For 
questions or assistance, please visit our website at www.
horizonhobby.com, submit a Product Support Inquiry, 
or call the toll free telephone number referenced in the 
Warranty and Service Contact Information section to speak 
with a Product Support representative. 

Inspection or Services

If this Product needs to be inspected or serviced and is 
compliant in the country you live and use the Product in, 
please use the Horizon Online Service Request submission 
process found on our website or call Horizon to obtain a 
Return Merchandise Authorization (RMA) number. Pack 
the Product securely using a shipping carton. Please 
note that original boxes may be included, but are not 
designed to withstand the rigors of shipping without 
additional protection. Ship via a carrier that provides 

tracking and insurance for lost or damaged parcels, as 
Horizon is not responsible for merchandise until it arrives 
and is accepted at our facility. An Online Service Request 
is available at http://www.horizonhobby.com/content/_
service-center_render-service-center. If you do not have 
internet access, please contact Horizon Product Support 
to obtain a RMA number along with instructions for 
submitting your product for service. When calling Horizon, 
you will be asked to provide your complete name, street 
address, email address and phone number where you can 
be reached during business hours. When sending product 
into Horizon, please include your RMA number, a list of 
the included items, and a brief summary of the problem.  
A copy of your original sales receipt must be included 
for warranty consideration. Be sure your name, address, 
and RMA number are clearly written on the outside of the 
shipping carton. 

NOTICE: Do not ship LiPo batteries to Horizon. If you 
have any issue with a LiPo battery, please contact the 
appropriate Horizon Product Support offi ce.

Warranty Requirements 

For Warranty consideration, you must include your 
original sales receipt verifying the proof-of-purchase 
date.  

Provided warranty conditions have been met, 

your Product will be serviced or replaced free of charge. 
Service or replacement decisions are at the sole discretion 
of Horizon.

Non-Warranty Service

Should your service not be covered by warranty, 
service will be completed and payment will be 
required without notifi cation or estimate of the 
expense unless the expense exceeds 50% of the retail 
purchase cost.

 By submitting the item for service you are 

agreeing to payment of the service without notifi cation. 
Service estimates are available upon request. You must 
include this request with your item submitted for service. 
Non-warranty service estimates will be billed a minimum 
of ½ hour of labor. In addition you will be billed for return 
freight. Horizon accepts money orders and cashier’s 
checks, as well as Visa, MasterCard, American Express, 
and Discover cards. By submitting any item to Horizon 
for service, you are agreeing to Horizon’s Terms and 
Conditions found on our website http://www.horizonhobby.
com/content/_service-center_render-service-center.  

ATTENTION:  Horizon service is limited to Product 
compliant in the country of use and ownership. 
If received, a non-compliant Product will not be 
serviced. Further, the sender will be responsible for 
arranging return shipment of the un-serviced Product, 
through a carrier of the sender’s choice and at the 
sender’s expense. Horizon will hold non-compliant 
Product for a period of 60 days from notifi cation, after 
which it will be discarded.  

  

FCC Information

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

CAUTION:

 Changes or modifi cations not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

This product contains a radio transmitter with wireless technology which has been tested and found to 
be compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz 
frequency range.

Summary of Contents for UMX F4U corsair























Reviews: