14
E-flite Mini ShowTime ARF Assembly Manual
9. Enlarge the holes in the cowling ONLY using a
1
/
8
-inch (3mm) drill bit. Slide the cowling onto the
fuselage. Secure the cowling using four 2mm x 8mm
sheet metal screws.
Hint
: Use thin CA to harden the holes drilled into the
cowl mounting tabs. This will help to prevent the screws
from vibrating loose in flight.
10. Place the propeller back on the motor shaft
and tighten the adapter. Snap the spinner cone onto
the spinner.
Note
: Make sure to check the balance of the propeller
after enlarging the hole in the propeller.
