background image

24

E-flite Hawker Sea Fury 480 ARF Assembly Manual

Warranty Services

QUESTIONS, ASSISTANCE, AND SERvICES

Your local hobby store and/or place of purchase 

cannot provide warranty support or service. Once 

assembly, setup or use of the Product has been started, 

you must contact Horizon directly. This will enable 

Horizon to better answer your questions and service 

you in the event that you may need any assistance. 

For questions or assistance, please direct your 

email to [email protected], or call 

877.504.0233 toll free to speak to a Product Support 

representative. You may also find information on our 

website at www.horizonhobby.com.

INSpECTION OR SERvICES

If this Product needs to be inspected or serviced, please 

use the Horizon Online Service Request submission 

process found on our website or call Horizon to obtain a 

Return Merchandise Authorization (RMA) number. Pack 

the Product securely using a shipping carton. Please 

note that original boxes may be included, but are not 

designed to withstand the rigors of shipping without 

additional protection. Ship via a carrier that provides 

tracking and insurance for lost or damaged parcels, 

as Horizon is not responsible for merchandise until it 

arrives and is accepted at our facility. An Online Service 

Request is available at http://www.horizonhobby.

com under the Support tab. If you do not have internet 

access, please contact Horizon Product Support to obtain 

a RMA number along with instructions for submitting 

your product for service. When calling Horizon, you will 

be asked to provide your complete name, street address, 

email address and phone number where you can be 

reached during business hours. When sending product 

into Horizon, please include your RMA number, a list of 

the included items, and a brief summary of the problem.  

A copy of your original sales receipt must be included 

for warranty consideration. Be sure your name, address, 

and RMA number are clearly written on the outside of 

the shipping carton.

Notice: Do not ship Lipo batteries to Horizon. If you 

have any issue with a Lipo battery, please contact 

the appropriate Horizon product Support office.

WARRANTy REQUIREMENTS 

For Warranty consideration, you must include your 

original sales receipt verifying the proof-of-purchase 

date. 

Provided warranty conditions have been met, 

your Product will be serviced or replaced free of 

charge. Service or replacement decisions are at the 

sole discretion of Horizon.

NON-WARRANTy SERvICE

Should your service not be covered by warranty 

service will be completed and payment will be 

required without notification or estimate of the 

expense unless the expense exceeds 50% of the 

retail purchase cost. 

By submitting the item for service 

you are agreeing to payment of the service without 

notification. Service estimates are available upon 

request. You must include this request with your item 

submitted for service. Non-warranty service estimates 

will be billed a minimum of ½ hour of labor. In 

addition you will be billed for return freight. Horizon 

accepts money orders and cashiers checks, as well as 

Visa, MasterCard, American Express, and Discover 

cards. By submitting any item to Horizon for service, 

you are agreeing to Horizon’s Terms and Conditions 

found on our website http://www.horizonhobby.com/

Service/Request/.

UNITED STATES

(Electronics and engines)

Horizon Service Center

4105 Fieldstone Rd

Champaign, Illinois

61822 USA

[email protected]

877-504-0233

Online Repair Request visit:

www.horizonhobby.com/service

(All other products)

Horizon Product Support

4105 Fieldstone Rd

Champaign, Illinois

61822 USA

[email protected]

877-504-0233

UNITED KINGDOM

Horizon Hobby Limited

Units 1-4 Ployters Rd

Staple Tye

Harlow, Essex

CM18 7NS

United Kingdom

[email protected]

+44 (0) 1279 641 097

GERMANy

Horizon Technischer Service

Christian-Junge-Straße 1

25337 Elmshorn, Germany

[email protected]

+49 4121 46199 66

FRANCE

Horizon Hobby SAS

14 Rue Gustave Eiffel

Zone d’Activité du Réveil Matin

91230 Montgeron

+33 (0) 1 60 47 44 70

Summary of Contents for Hawker Sea Fury 480





























Reviews: