❍
2. Connect the motor and speed control wires.
Install the gearbox into the fuselage. Use four
3 x 10mm self-tapping screws to secure the
gearbox to the firewall.
Note
: It is highly suggested to make the
adjustments to the speed control before installing
the propeller. Use the instructions provided with the
speed control for this step.
❍
3. Attach the propeller to the gearbox output
shaft. The single hex nut is behind the
propeller, and the washer and remaining nut
are on the front side of the propeller.
Note
: The text on the propeller faces the front
of the airplane.
26
