EN
5
Vertical Stabilizer Installation
1. Slide the vertical stabilizer (
A
) in the fuselage vertical stabilizer pocket.
2. Secure the vertical stabilizer with two M3x26mm countersunk machine
screws (
B
) (2mm hex driver required).
A
B
Horizontal Stabilator Installation
1. Slide the stabilator rod (
A
) into the mount on the fuselage.
IMPORTANT:
Care must be taken when inverting the fuselage.
2. Invert the fuselage and secure the stabilator rod in the fuselage with the
included M3x10mm counter sunk machine screw (
B
) (2mm hex driver
required). Tighten the screw until the screw head reaches the countersink of the
fuselage.
3. Ensure the screw captures the groove on the stabilator rod.
4. Insert the Z-bend into the 3rd hole from the output shaft of the servo arm. The
pushrod should be inserted from the outside of the arm and then snap the ball
link onto the ball mounted on the control horn.
5. Repeat the process for the other stabilizer half.
A
B
E
A
R
