5. Check that the wheels are parallel or have slight
toe-in. Use foam-safe CA to glue the struts to the
fuselage and each other. Make sure the wing is
sitting parallel to the ground so the wheels are
located at the same height.
6. Install the landing gear support disks using
foam-safe CA. Make sure to glue the disks
securely to both the horizontal fuselage and
landing gear struts.
7. Use foam-safe CA to glue the wheel pants to
the wheel retainers. Make sure the pants are
positioned so they won’t drag on the ground
during takeoff and landing before applying
the CA.
37