EN
Removing Propeller Adapter,
Propeller and Spinner
Note:
The information on this page is for
maintenance of the Yak 54. Spinner, propeller and
propeller adapter damage can result from
aircraft crashes.
CAUTION:
DO NOT handle propeller parts while
the flight battery is connected to the ESC. Personal
injury could result.
1. Remove the screw in the spinner.
2. Remove the spinner cone.
3. Use an adjustable wrench to loosen and remove
the propeller nut.
4. Remove the propeller from the prop adapter collet.
5. Remove the spinner backplate from the prop
adapter
collet.
6. Remove the swage plate from the prop
adapter
collet.
7. Remove the prop adapter collet from the
motor
shaft.
Motor and ESC Removal
Note:
The information on this page is for
maintenance of the Carbon-Z Yak 54. Damage
to these parts can result from aircraft crashes.
Installation of the motor is in reverse order of the
steps listed below. You must remove the propeller
and spinner from the motor (EFLM7300) before
removing the motor from the aircraft.
CAUTION:
DO NOT handle the motor or ESC
while the flight battery is connected to the ESC.
Personal injury could result.
1. Remove the battery hatch from the fuselage.
2. Disconnect the 3 motor wires located on the
bottom of the fuselage near the ESC.
3. Remove the 4 outermost screws on the “X”
mount, and slide the motor out of the nose.
12
Summary of Contents for CARBON-Z YAK 54
Page 2: ...EN 2...