10
E-flite Ascent PNP Assembly Manual
5. Use a felt-tipped pen to transfer the outline of the
fuselage onto the top of the stabilizer.
6. Remove the stabilizer from the fuselage. Use a hobby
knife with a new #11 blade to remove the covering from
inside the lines drawn in the previous step.
Important
: Use light pressure when cutting the covering
to prevent cutting into the stabilizer. Cutting too deep will
weaken the stabilizer and could cause it to fail in flight.
7. Reposition the stabilizer and connect the bend from the
elevator pushrod to the elevator control horn. The wire
will enter the horn from the side closest to the fuselage.
