13
EN
Service of Power Components
B
Disassembly
CAUTION:
Always disconnect the battery
before handling or adjusting the propeller
or motor. Failure to do so could result in
personal
injury.
Propeller
1. Remove the 2 screws (
A
) from the spinner (
B
).
Carefully separate the spinner from the back
plate (
C
).
2. Remove the lock nut (
D
) from the propeller
shaft (
E
), then remove the propeller (
F
) and
back plate.
Motor and Firewall
1. Carefully remove the cowling (
G
) from the
fuselage. Paint may hold the cowling on the
fuselage.
2. Loosen the set screws (
H
) and remove the
washer (
I
) before removing the propeller shaft
from the motor (
J
).
3. Remove the 4 screws (
K
) and motor mount (
L
)
from the fuselage.
4. Disconnect the motor wires from the ESC.
5. Loosen the set screws (
M
) and remove the
motor from the motor mount.
Assemble in reverse order.
Assembly Tips
• Correctly align and connect the motor wire
colors with the ESC wires.
• The propeller size numbers (6.8 x 3.5) must face
out from the motor for correct propeller operation.
• Ensure the spinner is fully connected to the
spinner back plate for safe operation.
A B
D
F
C
E
G
H
I
J
K
L
M
M
