5
OPERATION
NOTICE
When the heat function is used for the first time, a slight odor may be
present. This is normal and should not occur again unless the heater is
not used for an extended period of time.
BUTTON
ACTION/FUNCTION
INDICATION / RESULT
ON/OFF
1. Press to turn on the flame effect
and enable heater. The heater
switches will not work unless this
switch is turned on.
2. Press again to shut off the power
for all functions.
1. The flame effect is turned on. The
power light on switch illuminates. The
heater is now enabled.
2. The flame effect, heater, and power
lights all turn off.
LOW
HEAT
1. With the power turned on, press
turn on LOW heat. (The LOW heat
option must be on in order to utilize
the HIGH heat option).
2. Press again to turn off LOW heat.
1. The heater and fan turn on to LOW.
2. The LOW heat and fan both turn off,
but flame effect stays on.
HIGH
HEAT
1. With the LOW heat turned on,
press to turn on HIGH heat.
2. Press again to turn off HIGH heat.
1. Heater and fan both turn on to
HIGH.
2. The HIGH heat and fan turn off, and
the LOW heat and flame stay on.
TEMPERATURE LIMITING CONTROL
This heater is equipped with Temperature Limiting Control. Should the heater reach an
unsafe temperature (212 degrees F / 100 degrees C), the heater will automatically turn
off. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the control panel to OFF.
3.
Wait 5 minutes
.
4. Inspect the electric fireplace to make sure that no vents are blocked, or clogged
with dust or lint. If they are, use a vacuum to clean the vent areas.
5. With the power switch OFF, plug the power cord back into the outlet.
6. If the problem continues, have your outlet and wiring inspected by a professional.
