background image

 

MANUAL CONTROLS 

 

(1)  Power button 
(2) Timer settings – Heater timer can be programmed in hour increments from 1 to 9 
hours. Press button to select desired heater increment. The heater will turn off when 
programed time has expired. 
(3) Flame brightness – Press button to increase the brightness of the flame. There 
are 5 brightness settings (L0, L1, L2, L3, L4). 
(4) Turns heat to ON. 
(5-6) Temperature Adjustment – Heat temperature can be set to LOW (62 degrees) 
or HIGH (82 degrees). 
(7) LED Display – Digitally displays chosen temperature and timer. 
 

 

REMOTE CONTROL 

 
Once the “ON” button has been pressed, all function buttons are the same as for the 
manual controls. 
 
 
 
 
 
 
 
 
 
 
 
 
 

THERMOSTAT INSTRUCTIONS 

 
The thermostat will maintain the pre-programmed temperature of the last use until a 
new temperature has been selected. To select a new temperature, press the button in 
the LED display and reset to the desired temperature. 
 
 

CARE AND MAINTENANCE 

 
Always turn the heater OFF and unplug the power cord from the outlet before cleaning, 
changing the lightbulbs, or moving the stove. Failure to do so could result in electric 
shock, personal injury, or fire. 
Never immerse in water or spray with water. Doing so could result in electric shock, 
personal injury, or fire. 

 

Summary of Contents for EF-BLT12







Reviews: