E.F. Johnson Company 7243 LTR-NET Owner'S Manual Download Page 15

Page: 15 / 63

CONTROLS AND DISPLAY

SYS (RCL)

Standard Mode

SYS

Selects the next higher system.

SYS

Selects the next lower system.

SYS (xx) -

Directly selects specified system.

FCN RCL -

Momentarily displays the revert (selected) system if it

is not already being displayed.

Dial Mode

RCL -

Scrolls through the numbers programmed in memory.

FCN RCL (0-9) -

Recalls the number stored in the specified

memory location.

FCN RCL

Recalls the last number dialed from memory.

FCN RCL

Recalls the last number dialed.

GRP (CLR)

Standard Mode

The GRP key functions the same as “SYS” just described to change

or display the selected group.

Dial Mode

CLR -

Erases the last digit in the display.

FCN CLR -

Erases the entire number in the display.

1 (HOME)

Standard Mode

FCN HOME -

Selects the preprogrammed home system/group.

1 -

Pressing this key with the PTT switch pressed transmits the “1”

digit.

Dial Mode

1 -

Dials the “1” digit.

2 (PHONE)

Standard Mode

FCN PHONE -

Selects the dial mode and a telephone group in the

current system.

2 -

Pressing this key with the PTT switch pressed transmits the “2”

digit.

Summary of Contents for 7243 LTR-NET
































































Search results

Summary of Contents for 7243 LTR-NET

Reviews:

Related manuals for 7243 LTR-NET

Brands by name

Popular brands

E.F. Johnson Company 7243 LTR-NET, Owner'S Manual

Search results

Summary of Contents for 7243 LTR-NET

Reviews:

Related manuals for 7243 LTR-NET

Brands by name

Popular brands