E.F. Johnson Company 51 Series, Preliminary Operation Manual

Page: 48 / 72

SMARTNET/SMARTZONE FEATURES
48
system. The Enhanced Private Conversation mode is described in the
following information, and the Private Conversation II mode is described
starting on page 51.
The Private Call option switch is required to place these calls, and
either that switch or the Call Response option switch is required to
receive them. Proceed as follows.
Placing an Enhanced Private Conversation Call
This call can be initiated by selecting the unit ID from a call list (list
entry) or by directly entering it using the keypad (direct entry). Direct
entry is available with full keypad (17-key) models only. Proceed as
follows:
List Entry Method
1. With a SMARTNET/SmartZone channel selected, momentarily press
the Private Call option switch. The tag (alias) of the last ID called is
displayed if it matches an ID in your call list. Otherwise, the last ID
called is displayed.
2. Enter the two-digit index of the desired ID if you know it or scroll
through the list using the Up/Down switch until you find the desired ID.
Press the
F3 key to cancel the call.
3. Press the PTT switch to initiate the call. The display then indicates the
alias of the destination radio. If the entered digits do not correspond to
a valid list entry, “INVALID” is displayed and an error tone sounds.
Proceed to the bulleted list following the next method for other condi-
tions that may occur next.
Direct Entry Method (Full Keypad Models Only)
1. With a SMARTNET/SmartZone channel selected, press and hold the
Private Call option switch until a tone sounds (approximately 1
second). The last ID called is displayed.