E.F. Johnson Company 51 Series Preliminary Operation Manual Download Page 17

Page: 17 / 72

CONTROLS AND DISPLAY

Display

The front panel display is shown above, and the following informa-

tion is indicated:

Alphanumeric Characters -

This area of the display indicates the

selected channel, error conditions, and other information.

Sec -

Indicates that transmissions are encrypted (see page 28).

Dig -

Indicates that a digital (Project 25) conventional channel is selected.

Rx -

Indicates that a carrier is being detected on the selected or scanned

channel.

Tx -

Indicates the transmitter is keyed.

Pgm -

Indicates that the keypad programming mode is selected (see

page 40).

SL -

Indicates that the displayed channel is in the scan list (see page 25).

Pri -

Indicates that the displayed channel is programmed as the current

group’s priority channel (see page 36).

Sec

Dig

Pgm

SL Pri

Call ID

Scan

Alphanumeric Display

Summary of Contents for 51 Series









































































Search results

Summary of Contents for 51 Series

Reviews:

Related manuals for 51 Series

Brands by name

Popular brands

E.F. Johnson Company 51 Series, Preliminary Operation Manual

Search results

Summary of Contents for 51 Series

Reviews:

Related manuals for 51 Series

Brands by name

Popular brands