8
O-RINGS
The double O-ring on Hook-Eye guarantees the camera to be waterproof.
ATTENTION
Dirt and fragments on the O-ring’s may compromize the camera water tight,
letting water enter
into the camera, damaging the device.
THIS KIND OF CAMERA DAMAGE IS NOT COVERED BY THE WARRANTY
Must always check the O-ring’s cleanliness, if damaged please replace with
an original one.
In order to clean it, use your finger wet with clean water or saliva. Do not
attempt to use salt water.
All Hook-Eye products are tested for endurance and quality.
Led Lighting System (6)
Hook-Eye has a smart integrated LED lighting system.
FRONT PANEL
The front panel contains Status LED, the slot SD, USB, on and off button
and battery.
Status Led (8)
The dual led indicates the current Hook-Eye operating status. One led is
located on the front panel, the other just below the lens on back end.
Action
Led indication
State
IN USE
Green Flashing
Recording
Red Flashing
Out of batteries
IN CHARGE
Red Steady
SD Card not present
or to be formatted
Red Flashing
Charging
Green Steady
Charge Completed
Position 1 (left): this position allows Hook-Eye to
automatically switch On and Off the LED’s when needed.
Position 2 (right): this position powers off the LED.
Please refer to the setting file section for more details.
