User Manual HTS801
Humidity and Temperature Sensor for High Humidity and Chemically Polluted Conditions | 55
11
Appendix: Display Menu Structure
11.1
Overview
Menu
Data logging
Configuration.of.the.data.logger/graph.-.sampling.rate.|.graphs
Display settings
Display layout - measurands | brightness | display alarm | orientation
Analog output
Output.configuration.-.mode.|.measurands.|.scaling.|.error.indication
Heating mode settings
ARC.and.CG.configuration.-.activation.|.deactivation.|.parameters
Alarm output*
Relay.configuration.-.mode.|.set.points.|.state
Customer adjustment
Adjustment.-..1.and.2.point.humidity/temperature.adjustment.|.
reset to factory adjustment | calibration status
Modbus settings*
Configuration.of.Modbus.RTU.data.transmission
IP settings*
Configuration.of.Ethernet.module
Device settings
Settings - language | date, time | parameters | password protection
Status
Status and device information
* Menu only available with the corresponding optional module.
Fig. 47 Menu overview
11.2 Detailed Information
Menu
Sampling rate
Data logging
Scale maximum
Scale minimum
Axis 1
Measurand
Axis 2
Measurand
Scale maximum
Value
Value
Scale minimum
OFF
1.s./.10.s./.30.s
1.min./.5.min./.15.min./.30.min
1.h./.5.h./.12.h
Delete saved values
OFF
Temperature [°C]
Temperature [°F]
Rel. humidity [%]
Vap. p. pressure [mbar]
Vap. p. pressure [psi]
Dew point [°C]
Dew point [°F]
Wet bulb temp. [°C]
Wet bulb temp. [°F]
Abs..humidity.[g/m³]
Abs..humidity.[gr/ft³]
Mixing.ratio.[g/kg]
Mixing.ratio.[gr/lb]
Enthalpy.[kJ/kg]
Enthalpy.[BTU/lb]
Frost point [°C]
Frost point [°F]
Volume concentr. [ppm]
Fig. 48 Data logging