Prodcut Introduciton
1.
Product function introduction as following picture:
Controller function sketch map
Receiver function sketch map
Use Introduction
1
）
. Open battery cover
，
put in 4pcs 1.5V
AAA battery as
battery box polarity indication, then close it.
2
）
. Connect PSII console to TV, put in the game dish,
insert receiver.
3
）
. Draw the switch in controller (HP5139) front to “ON”
switch on
，
POWER LED bright
，
then switch on the
game console,”CONNECT” in receiver bright
；
If ”CONNECT” trun from winking to lasting,
connection for controller and receiver is ok, play is
ok
；
If “CONNECT” continue winking
，
show that
connection of controller and receiver is off.
4
）
.Press”CONNECT”
，
winking speed fast, then
press”CONNECT” in controller
，
until “CONNECT” in
receiver continue bright, conncetion of controller and
receiver is ok.
5
）
. When connection is ok, no work for 5 minutes
，
enter
to auto sleep model. Press ”CONNECT” in controller
for 3 seconds awake , POWER LED is on , get
right.
6
）
. When battery in low, POWER LED continue winking
remind of changing battery.
7
）
. Press any function button, then press”TURBO” to set
this button with TUTBO function
；
Press this button by
setting, then press”TURBO” to cancel TURBO
function
；
press”TURBO”, then press”START” select the
speed of TURBO, total 4 speed for selection, press
once for changing one speed.
8
）
.When controller beyond the receive distance,
the”CONNECT” in receiver continue winking, then
controller in this status without function or fucntion is
abnormal
9
）
.When connection of controller and receiver finish, then
play need notconnect by person, auto connect as
