14
See3CAM_130 DFU Application User Manual
FAQ
1.
I am video conferencing with one of e-con Systems USB camera in laptop.
During the call, sometimes the LED at the backside flickers and when the
camera flickers, the preview stops and resumes.
It might be due to bandwidth limitation issue. Please try the following steps:
1.
Please disconnect other USB devices which are connected to the same host
and connect only the USB camera and test it.
2.
Please use powered USB hub to overcome this issue.
3.
Please check in different desktop PCs in different USB ports, if it is working
fine.
If you still face the same issue, please write to
with your requirement in detail to get immediate support.
2.
How to access e-con Systems See3CAM Custom Format with OpenCV?
Please refer the blog
https://www.e-consystems.com/blog/camera/?p=1317
to
get an idea on how to access custom format cameras with OpenCV.
3.
I am using four cameras simultaneously but unable to get a clear preview.
It might be due to bandwidth limitation issue. Please try the following steps:
1.
Please disconnect other USB devices which are connected to the same host
and connect only the USB camera and test it.
2.
Please use powered USB hub to overcome this issue.
3.
Please check in different desktop PCs in different USB ports.
4.
The output format of See3CAM_130 camera is RGB-IR. How to split this RBG-IR
data?
Please refer the source code of sample console application, which is available in
the developer resource website. In this sample application, e-con Systems have
separated the RGB and IR data.
5.
I am using e-con Systems See3CAM in Matlab and I need support on how to
acquire image from the tool.
e-con Systems does not test See3CAMs in Matlab environment. If you need
support in Matlab tool, then please write to
with your requirement in detail. Based on the requirement and critical level of
support, the head of the technical team will discuss with the team and get back
at the earliest.
6.
I need See3CAMGUVCview source code. Please provide the same.
