![background image](http://html1.mh-extra.com/html/e-con-systems/see3cam-130/see3cam-130_getting-started-manual_3058420004.webp)
See3CAM_130
Getting Started Manual
24-Oct-2016
| Subject to change without notice
Page 4 of 9
2 Introduction
The See3CAM_130 is a 13.0 Mega pixel, colour, UVC Compliant, USB 3.1 GEN1 SuperSpeed
Autofocus camera with Type C connector from e-con Systems, a leading embedded Product
Design Services Company which specializes in the advanced camera solutions. The
See3CAM_130 is a USB3.1 GEN1 SuperSpeed Autofocus camera product with reversible plug
and play Type C connector interface.
The See3CAM_130 is a 13.0 MP colour camera with Auto focus module. The See3CAM_130 is a
one-board solution containing Auto focus camera module with 1/3.2” AR1335 CMOS image
sensor from ON Semiconductor along with USB 3.1 GEN1 interface to the host PC, through
Type-A to Type-C legacy cable with reversible cable detection. See3CAM_130 can stream
uncompressed VGA@ 120 & 60 fps, HD@ 60 & 30 fps (720p60, 720p30), FHD @ 60 & 30 fps
(1080p60, 1080p30), 4K@ 15 & 7.5 fps (UHD & QFHD) UYVY formats. This can also stream the
uncompressed 13MP at 9 & 4.5 fps when connected to the USB 3.1 GEN1 host PC.
It also streams compressed MJPEG VGA@ 120 fps, HD@ 60 fps (720p60), FHD @ 60 fps
(1080p60), 4K (UHD & QFHD) at 30 fps UYVY formats. This can also stream the compressed
MJPEG 13MP at 20 fps. This See3CAM_130 is a UVC-compliant USB 3.1 GEN1 SuperSpeed
Camera with Auto-Focus that is also backward compatible with USB2.0 host ports and does not
require any special camera drivers to be installed in the host PC. When connected to USB2.0
host ports, the See3CAM_130 supports fewer resolutions and at lower frame rates.
The See3CAM_130 is UVC-compliant camera and it does not require any drivers to be installed
on the PC. The native UVC drivers of Windows and Linux Operating Systems shall be compatible
with this camera. e-con also provides the sample application that demonstrates some of the
features of this camera. However, this camera can be utilized any DirectShow application such as
Skype etc.
This document describes about how to connect the See3CAM_130 board with USB 3.1 GEN_1
host PC.
3 Scope
The scope of this document is limited to providing necessary overview of the See3CAM_130
camera board and how to use the same on a typical PC based environment.
4 Disclaimer
The specifications of See3CAM_130 camera board and instructions on how to connect this board
with PC are provided as reference only and e-con Systems reserves the right to edit/modify this
document without any prior intimation of whatsoever.
5 Description
The See3CAM_130 is a one board solution of size 80mm x 15mm. This camera board is based
on AR1335 Image sensor from ON Semiconductor along with Image Signal Processor (ISP) and,
has USB interface and the USB Type-C connector (Flip detection logic only). This See3CAM_130
is a Ready-to-Manufacture camera board with all the necessary firmware built in and compatible
with the USB Video Class (UVC) version 1.0 standard. Customers can integrate this camera in to
their products right away and this helps our customers to cut short the Time-to-Market. This