Cocoon
Hardware User Manual
05-Jun-2015
www .e-consystems.com
| Subject to change w ithout notice
Page 4 of 10
2 Introduction
Cocoon Board (Camera board connected with Cocoon Adaptor board) interfaced with Wandboard
through a 33-pin flex cable. The flex cable connecting Cocoon camera Adapt or board and
Wandboard is 15 cm in length.
This document explains how to interface the Cocoon Camera board and Adaptor board with
Wandboard development Kit. The scope of this document is limited to a brief description of the
steps to be followed while connecting the board with Wandboard.
3 Handling Procedure
The following figures explain how to connect the Cocoon Adaptor board with Wandboard.
Figure 1: Cocoon Adaptor Board
Figure 2: FPC Connector Unlock ed Position
