background image

27

1.

2.

SAFETY AND GENERAL INFORMATION

 

The PG 300/302 

Pager

 Collar complies with all National and

International Standards and Guidelines for human exposure to radio

frequency electromagnetic energy.
Nearly all electronic devices are susceptible to electromagnetic

interference (EMI) if inadequately shielded or designed without

precautions to EMI.
PG 300/302 e-collar transmitters manufactured by E-Collar

Technologies, Inc. comply with Article 15 of the FCC rules and

operate under Part 95 of FCC regulations.

 

IMPORTANT NOTICE

To avoid Electromagnetic Interference and/or compatibility conflicts,

please turn off your transmitter and collar receiver in any facility

where posted notices instruct you to do so. Never use your

equipment in close proximity of a Hospital or Health Care Facility or

enter the facility without turning off both units.
An FCC license is not needed to operate PG 300/302 remote

pager

 transmitters. However, any change or modification made to

the transmitter, including the supplied antenna, without the

expressed written approval of E-Collar Technologies, Inc. could

 

void

your authority to operate.

PG300/302 Owner’s Manual

Summary of Contents for PG-300

































Reviews: