1.3. Introduction to Parameter, Information and Error History Menus
The service menu is accessed if K1 key is pressed for 5 seconds. The sub-menu desired to be
entered is opened with K1 key by switching between the symbols displayed on the screen with the
K5 and K6 keys.
Displayed Symbol
Menu Description
tS
Parameters Menu
In
Information Menu
Hi
Error History Menu
1.3.1. Parameters Menu
When "tS" symbol appears on the screen after pressing K1 for 5 seconds, press K1 once again and
"00" is displayed on the screen. The displayed message is the password screen required to access
the service menu. When this screen appears, change the password by using K3 and K4 and confirm
the password with K5 or K6.
For restricted menu access, the required password should be entered as 03 and K5 or K6 should be
pressed. With this password, only P00, P03, P05, P23, P24, P30, P33 parameters can be accessed.
In order to access the F22 parameter, which must be changed for the boiler capacity selection, the
password should be 15. With this password, only the capacity selection parameter can be accessed.
Parameter numbers are displayed on the screen after the password is entered. You can navigate
through the parameter numbers with the K5 and K6 buttons, and increase or decrease the parameter
number you want to change or read by entering it with K3 or K4.
While in the parameters menu, press K1 once to return to the menu selection screen. You can return
to the main screen by pressing and holding K1 for 5 seconds. If no button is pressed for 60 seconds,
the normal operation screen will be returned.
1.3.1.1. Table of Parameters
Parameter
Parameter Name
Definitions of Parameter Values
Setting
Range
Factory Setting P00
2
3
4
5
P00
Domestic water configuration *
1 =Instantaneous heater
2 =Instantaneous Solar energy
3 = Storage tank
4 = Solar energy storage tank
5 =Central heating only
1-5
1
2
3
4
5
P03
Type of heating system
0=Radiator heating
1=Ground heating
When parameter P03 is set to 1, P02 is limited to
45°C.
When parameter P03 is set to 1, P02 is limited to
80°C.
0-1
0
0
0
0
0
P05
Type of domestic water request
0: Pakkens Brass Flow CEME-GTE Sensor
1:-
2: Emas Flow Bitron Pressure Switch
3: Pakkens C Flow CEME-GTE Sensor
4:-
0-4
0
0
0
0
0
P23
AFCT waiting time for central heating request (min.)
0-10
3
3
3
3
3
6
