15
USE OF THE SCOOTER
GETTING ON THE SCOOTER
1. Make sure the ignition key is not inserted.
DANGER.
Never get on or off the scooter with the key in the ignition. Remove the key from dashboard first.
This will prevent the vehicle from moving during the driver’s up or down operation.
2. Get on the side of the scooter.
3. Press up and release the lever of rotation of the seat. Without releasing the remote turn the seat until it is in front of you. Release the remote
and make sure it stays locked without turning.
4. Make sure the controller is firmly in position
5. Get in the seat and sit comfortably and safely.
6. Press the rotation knob of the seat again and turn with the seat until it is placed with the handlebar just in front. Release the knob.
7. Make sure that when you release the turning knob the seat is locked (no longer rotating) in front of the handlebar.
8. Place your feet firmly on the vehicle floor.
ADJUSTMENTS AND CHECKS BEFORE CIRCULATION
- Is the seat at the right height. Remember that the feet should be well supported on the floor of the scooter once seated.?
- Is the seat secured on your platform?
- Is the handlebar shaft firm on your platform? Is the handlebar adapted to your grip position to steer?
- Have you inserted the key into the ignition and put it in its “ON” position? If this is not the case, insert the wrench into the cockpit and rotate
clockwise to the “ON” position
- Do the indicators and controls of the handlebars work correctly?
- He has planned his route avoiding difficult terrain and with great inclination.
To adjust the scooter for your added safety and comfort read the COMFORT SETTINGS section
