Installation
1. Turn off the PC and monitors.
2. Connect the DVI male extension cable between the PC
and the “DVI in” port of Distribution Amplifier.
3. Connect the DVI male/female extension cables between
the monitors and the “DVI out” ports of Distribution
Amplifier.
4. Connect the power cord and turn on the Distribution
Amplifier.
5. Turn on the PC and monitors.
Note:
If you install the DDC monitor for the Distribution
Amplifier, the rest of monitors must be the same
resolution as the DDC monitor.
Operation for cascade:
1. The function to display identical image on more
monitors, you request to attach another Distribution
Amplifier.
2. Connect the DVI male/female extension cable
between the former Distribution Amplifier of the “DVI out
1” port and the latter Distribution Amplifier of the “DVI in”
port.
Note:
Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution Amplifier.
P.S.: The example cascades the 2 and 4 ports Distribution
Amplifier; however, you can cascade the DVI Distribution
Amplifier with demanded
Port.
-3-
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-4-
