E-Bike B02NU, Manual

Page: 7 / 20

After entering the main display, click "+" or "-" to increase or
decrease the gear level and change the motor output power, the
default gear of the instrument is 0-5 (support customization); No
power output in 0 gears
,
1 is the lowest power, and 5 is the highest
power. When the monitor is powered on, the default setting is Gear 0.
The
gear level selection screen is shown in the following figure:
③
Headlight/backlight switch
Turn on the light
: Press and hold "+"
when
the
light is off
, the
headlight indicator lights up, and the brightness of the display
dims.
Turn off the lights: When the light is on, press and hold the "+"
key, the headlight indicator becomes dimmed, and the display
brightness becomes brighter.
The headlight switch interface is shown in the figure below:
④
Boost mode
In any gear, long press
"-" to enter boost mode, the speed is
6km/h
,
when entering boost mode, the icon ""
is in dynamic, release the button"
- "exit boost mode " disappears, and the speed
returns to zero.
The interface is shown in the following figure:
In boost mode, the indicator is displayed dynamically. When
the speed is lower than 6km/h, release the "-" to exit the boost
state. If there is no operation within 5 seconds under static, it
will automatically jump to 0 gear.
7
/
20