background image

Manual for Power Pack compatible for Bosch* Classic (+) drive system

 

* Bosch is a trademark of the Robert Bosch GmbH   

 

         

   

Page 

9

 of 

9

 

Maintenance 

The life span of your Power Pack depends mainly of your carefully usage. 
Never use the complete capacity, but use it regular and store it at 17° C. That way, your 
battery will thank you will longer life span. 
With increasing aging your battery will loose capacity, anyway. 
Do not try to refresh or exchange the cells on your own! 
Get in contact with our service department. They can also rate and exchange single 
components after the warranty time. 
An essential shorte usage time after fully charged the battery indicates that the battery is 
dissipated, however. Replace it! 

 

Troubleshooting 

If your drive system can not be activated, please check the contacts of the discharge plug to 
make sure that they are clean, straight and undamaged and that there is a safe contact 
between battery and connector box. 

 

If the drive system can still not be activated, please try to charge your battery. 
If charging does not start, please check the polarity of the charge plug. 
Please test the battery by pushing the capacity indicator button. 
Is the power cord of the charger connected properly and performs the wallet socket? 
Is the green LED of the charger flashing? If this is flashing red, there can be a short circuit. 
Charger and battery must be returned to the E-Bike Vision service center. 

 
If the battery is damaged, defective or exits any liquids or smell? Please do not use your 
Power Pack further and contact your dealer or our service center. 

 

Recycling 

Do not dispose lithium batteries in the household waste! 
Return defective or used batteries to the battery dealers or to the municipal waste 
collection centers. Turn back the battery in discharged state. Also prevent short-
circuits by covering the terminals. 
With the proper disposal of your battery, you make an important contribution to protect our 
environment. 

 

Summary of Contents for Power Pack










Reviews: