E-Bench KH 2331 Instruction Manual Download Page 4

4

GB

5

GB

PLL CD player with radio and MP3
KH 2331/2332/2333

Intended use:

The device is suitable for playing back Audio
CDs, CD-Rs, CD-RWs and MP3-CDs.
It is also used for receiving MW and UKW radio
transmissions. 
Not intended for commercial use.

Operating elements:

Volume control (Setting playback volume)

Equalizer key (Equalizer function)

STOP key (Stopping playback) 

MEMORY/ PROG. key (Track program-
ming/allocation of up to 64 storage spaces)

REPEAT key (repeated playback)

R-SKIP key (CD skip track/
Search /Rewind key)

F-SKIP key (CD skip track /Search /
Forward key)

CD PLAY/ CD PAUSE key (start/ pause
playing back)

 

POWER key (Switch on/off the device)  

 

Function switch TUNER / BAND; *MONO / ST.
(Switch on radio operation/ Wave range 
selection/ MONO/ STEREO play back.)

FIND key (MP3-CD: Display of the track
search function)

Display

ALBUM / key (MP3-CD/CD:
Selecting the next album/
radio: Selecting the next saved radio 
transmission)

ALBUM / PRESET key (MP3-CD/CD:
Selecting the previous album/ radio:
Selecting the previous saved radio
transmission)

Headphone socket

UKW antenna

Type label

Mains connection

Battery compartment

TIMER key

(Model KH2331)

!

SLEEP key

(Model KH2331)

Technical data:

Rated voltage: ....................230V AC / 50 Hz
Power consumption :..........18 Watt 
Max. output rating: ............2 x 2 Watt
Battery operation: ..............8 x UM-1 battery/ 

2 x UM-3 battery
(Memory backup)

Model KH2331: ..................8 x UM-2 battery/

2 x UM-3 battery

(Memory backup)

Radio operation: ................MW:  522 - 1620 KHZ

UKW: 87.5 - 108 MHZ

CD player: ..........................CD, CD-R, CD-RW,

MP3-CD

Headphone socket: ............Stereo / 3.5 mm

Safety instructions:

 

Danger! Electric shock!

Warning: Do not operate the device, if the
power plug, power cord or the device is
damaged.

If the device falls of, get it checked by an
electrician befire you operate it again.

Prevent liquids from seeping into the device.
In case of emergency, pull out the power
plug immediately.

Do not use the device in wet areas (e. g.
Bathroom) or areas with a lot of dust
accumulation.

Do not remove the cover under any circum-
stances. The components inside the device
are not intended to be maintained by the
user. Repairs are to be carried out exclusively
by a specialist firm or the service centre.

Do not place the device in direct proximity
of inflammable material (e.g. curtains,
inflammable liquids, etc.).

To disconnect the device from the power
supply completely, pull out the power plug
out of the power socket and whicle doing
so, always hold the connector and not the
cable.

Check the power cord regularly for possible
damages. 

Important: Before the initial use, remove the
protective cap from the CD slot.

 

Danger! Laser radiation!

The CD player has a "Class 1 Laser“.

Never open the device.

Never attempt to repair the device. There is
invisible laser radiation inside the device.

Do not expose yourself to the laser beam.

 

Important! Fire hazard!

Do not expose the device to extreme tempera-
tures, as the heat built-up inside the device can
lead to defect and/or fire.

Avoid direct solar radiation.

Do not cover the ventilation slots of the
device.

Leave a minimum free space of approx. 
10 cm on the sides.

Do not place any open sources of fire, like
candles, on the device.

Power supply

Mains operation:

Check whether the voltage of your device
and the local voltage are identical.

If you want to operate the device on a 230V
household network power socket:

Plug the power cord into the adaptor 

provided on the rear side of the device.

Plug the power plug into the power socket.

Battery operation:

Note: Always use new batteries of the same
type while changing batteries.

Batteries with values that have not been
recommended can damage the device.

Never try to open the batteries.

Never expose the batteries to extreme
amount of heat and never throw them into
fire.

Always dispose off the batteries in an envi-
ronmentally compatible manner. Contact
your local authorities for the purpose.

Inserting the batteries: (The power plug is to
be removed)

Insert the eight batteries 
(TYPE UM-1/Model KH2331: TYPE UM-2)
and the two batteries (Type UM-3 „AA“) into
the battery compartment 

on the undersi-

de of the device. Make sure that the plus
(+) and minus (-) poles of the batteries have
rightly been placed in the indicated places.

Note:

Power Standby

If the device is being connected to the power
socket for the first time, it switches on to the
standby mode.

Press the POWER key 

 

to switch on the

device. The device remains in the standby
mode until it is switched on.

Pull out the power plug in order to complete-
ly switch off the device.

Setting the time

In the standby mode

1.

Press the MEMORY/ PROG. 

key for two

seconds in order to set the time. The "12
HOUR“ display appears in the display.

2.

Press the F-SKIP 

or the

R-SKIP 

key to select the 12/24 hour display.

Confirm the selection by pressing the 
MEMORY/PROG. 

key again. The first two

digits flash in the display.

3.

Press the F-SKIP 

or the 

R-SKIP 

key to set the current hour. Confirm

the selection by pressing the MEMORY/PROG.

key again. The last two digits flash in the

display.

4.  Press the F-SKIP 

or R-SKIP 

key to set

the current minutes. Confirm the set time by
pressing the MEMORY/PROG. 

key again.

Operation/ Radio operation

Set up the antenna 

 

and if necessary, adjust it to

receive better radio reception. 

Transmission search

1.

Press the POWER 

 

key to switch on the

device.

2.

Press the TUNER/BAND 

key. The radio

switches on.

3.

Press the TUNER/BAND 

key again to set

the transmission range (MW/UKW).

KH2331-2333_Boomboxen_UK  02.03.2005  14:03 Uhr  Seite 4

Reviews: