12
2.9 Selecting radio presets
• There are 10 presets for each radio band.
• Each button can have two presets. In order to call up
the other preset, just press the button a second time.
• If the radio is switched on, press the station presets 1/6.
The display shows 'MEM' steadily, the frequency of
preset 1 appears steadily on the LCD and '1' appears
steadily on the 'MEM display.
• To select the required preset station, press the
appropriate button 1/6, 2/7, 3/8, 4/9 or 5/10.
• The radio is silenced (MUTE) during the preset setting
process. If the input of new preset data is interrupted
for 1 second, then the preset selection is accepted, the
radio changes to the corresponding frequency and
the muted mode ends.
2.10 Storing radio stations
• Press »MEMORY« once to save the frequency of the
radio station currently being received. The 'MEM'
display starts to flash.
• The particular preset is determined by pressing once
or twice on the appropriate preset station button.
The number of the selected preset is shown on the
'MEM display.
• Press »MEMORY« again to initiate the preset process.
The 'MEM' display shows steadily.
• When the 'MEMORY' display is flashing you can use
»UP«, »DOWN« or »MEM. SCAN« to search up and
down through the presets. The 'MEMORY' display is no
longer shown.
2.11 Station search manual /search process
• If the radio is on, press »UP« to increase the reception
frequency manually (for step sizes, see frequency steps
column in the table).
• Press »DOWN« in order to change the reception
frequency downwards (by a step at a time).
• Keep pressing on to »UP« or »DOWN« button for an
automatic search (search process) for the nearest
receivable radio station.
KH_2024_GB 23.07.2003 10:57 Uhr Seite 12
