E.A.S.Y. inTACT Eraser, User Manual

Page: 7 / 12

Using the Eraser
E.A.S.Y.
LLC
E
NGINEERING TO
A
SSIST AND
S
UPPORT
Y
OU
5
Turning the Eraser On and Off
The on-off switch is the Eraser’s only control; it is a rubber push button. To indicate when
the Eraser is on (heated up), a beeper is used. When the Eraser is on and working properly,
the soft high-pitched tone will typically cycle continually – on for 3 or 5 seconds and then
off for 8 to 10 seconds. This means that if there is no tone for more than 15 seconds, the unit
is off.
If the Eraser has been off for more than five minutes, and has cooled to room temperature,
it will take about 40 seconds to come up to operating temperature when turned on. During
this period, the beeper tone will be continuous. You will know it is ready for use when the
on-off cycling begins.
Eraser