3/7
MESH-1200-TWIN QIG
| DZS, Inc.
Ports/Button
Description
Color
WAN
For a Controller unit: used to connect to the Internet (connection to the
main Gateway)
Blue
For an Agent unit: port may be used for:
a)
Wired connection to the LAN and the Controller
b)
Wired connection for user devices for internet access (e.g. Set Top
Boxes, Smart TVs, Google Chromecast, etc.)
LAN1
RJ45 Gigabit Ethernet LAN Port
White
LAN2
White
DC-IN
Power input from Power Supply unit
Black
WPS/Reset
Press 1 to 5 seconds to enable WPS
WPS button used for Controller and Agent EasyMesh paring by pressing for
~3 seconds on both units at the same time
White
When pressed for more than 10s the device will reboot
When pressed for more than 302 the device restores the factory settings
Installation instructions
1)
Using the system default credentials
a)
Find the MESH-1200 unit labeled “Controller” - The unit has a © on the unit label located on the back of the unit.
b)
Connect power by plugging the provided PSU to an electric wall outlet and the barrel connection on the
corresponding port on the back of the unit
c)
Plug on end of the provided CAT 5E Ethernet cable in the WAN port of the unit – the WAN port is labeled BLUE –
plug the other end of the cable to a free Ethernet port on the gateway / modem from the service provider
d)
Take the second unit, the Agent, and power it up not more than 5 to 10 meters away from the controller
e)
Connect power to the Agent unit by repeating step 2
f)
Wait for 30s
g)
Press the WPS button on both Controller and Agent units at the same time, for 3 to 5 seconds
h)
Wait 30 seconds.
i)
Place the Agent on a convenient location (typically 20 to 30 meters away form the Controller and one or two walls