DZS 1664WC Quick Start Manual Download Page 4

Page: 4 / 9

—

03 SINGLE ROUTER SETUP STEPS

The DZS Router can be connected according to the diagram above.

01 Note the DSL/PON/Cable Gateway must be connected to the WAN port of DZS Router.

When it is connected to the Internet ,the LED light is steady green. If you can, place the DZS

Router in an open area such as a table or a shelf.

02 Wired devices can be connected directly to LAN port for Internet access. Wireless

devices can use the network name (SSID) & password (see the sticker on the backside of

Azores Router) to connect to Internet.

04 MESH SETUP STEPS

Choose one of the following methods to setup your Mesh Set(1664WC-DUO).

Summary of Contents for 1664WC

Page 1: ...1 1664WC WiFi 6 Wireless Router Quick Start Guide ...

Page 2: ...thout Mesh function by default Please refer to SINGLE ROUTER SETUP STEPS for network setup Product Mode 1664WC DUO as mesh router set 1664WC DUO contains two APs Main AP and satellite AP distinguished by the label on the backside of the device Please refer to SINGLE ROUTER SETUP STEPS for Main AP MESH SETUP STEPS for Satellite AP for network setup ...

Page 5: ...layout 03 Just power on the Satellite AP and wait for about 5 minutes When the LED is Steady Green then the Mesh networking is successful Tip To optimize wireless performance place the Satellite AP in a location that minimizes the barrier such as wall door and floor between the Main AP and Satellite AP We recommend one wall door floor between the Main AP and Satellite AP ...

Page 6: ...mplete the connection 02 Place the Satellite AP at a proper location based on the cable deployment in your home 03 Connect the Satellite AP to LAN port of your Main AP via network cable 04 Power on the Satellite AP When the LED is Steady Green then the Mesh networking is successful ...