DZOFILM 12290654, User Manual

Page: 8 / 21

Align the groove under the EF bayonet to the positioning pin. Place
the bayonet plat on the rear of the lens；
At this moment, the groove on the surface shall align the Arrow
Mark and Reticle. If not, that means the position of bayonet is
incorrect.
Slightly twist the mount, and make sure the bayonet is flat;
Finally drive 7pcs M2*18 screws into screw holes in symmetrical
order.
PS. After chaning the mount into EF mount, the rear glass element
exceeds the mount a little bit. Do not place this end on the desk
without rear cap in order to avoid scratches.
Assemble EF Mount
Positioning pin
Groove under EF bayonet
Arrow Mark Reticle Groove on the surface of
EF bayonet
M2*18 Screws